Skip to content 
Products & Services
We are a leading manufacturer, supplier and service provider of Water Analysis Service, Antiscalant Chemical, Sewage Treatment Plant, Sludge Dewatering Treatment and many more.
Bag Filters
-
Bag Filters4 X 10″ LONG BAG FILTER
Filter Bags – Liquid Filtration. we offer the selection in 4″ x 10″
Lightweight and durable, these filter bags are used for air pollution control and filtration of paints & thinners as well.Features:
- High flow rate
- Low pressure drop
- Excellent performance
-
Bag FiltersBag Filter 7 x 32
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
- Bag Filters
Bag Filter 4 x 20
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
-
Bag FiltersBag Filter 7 x 16
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
- Bag Filters
BAG FILTER 7 X 42
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
- Bag Filters
4 x 10″ Bag Filter
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
Boiler Additives
-
Boiler AdditivesEvaporator Antiscalant
Evaporator systems in sugar industries tend to accumulate salts. The first two Evaporator bodies have generally a deposition of carbonate and phosphate, while the third and fourth have sulphates and silicates. These deposits are results of the sulphitation and lime processes done in clarification of the juice. Our formulation is a blend of low molecular weight polymers which helps in protecting the quadruple evaporators from scaling & deposits in multiple ways. It is very effective for Carbonate, phosphate, sulphate, silicate deposits and it maintains a consistency in the Brixs of sugar juice in respective evaporator bodies.
It thus helps retarding the scale formation in the evaporator and improves heat transfer by increasing the solubility of dissolved salts reducing evaporator cleaning frequency.
Cartridge Filter
-
Cartridge Filter10″ Jumbo Wound Filter
PP Wound Filter Cartridge manufactured using a high quality raw material. These Industrial Wound Filter Cartridges Supported by a team of highly experienced and skilled professionals, we bring forth a comprehensive range of PP Wound Cartridge. our client can avail wide rage of PP Wound Cartridge like 10″ PP Wound Cartridge, 20″ PP Wound Cartridge, 30″ PP Wound Cartridge, 40″ PP Wound Cartridge, 10″ Jubbo PP Wound Cartridge, 20″ Jumbo PP Wound Cartridge. The double O-ring sealing system ensures positive sealing of the filter cartridge within the housing and virtually eliminates and potential for bypass. The all PP construction provides excellent chemical compatibility in a wide variety of process streams.
-
Cartridge Filter30″ Wound Cartridge Filter
PP Wound Filter Cartridge manufactured using a high quality raw material. These Industrial Wound Filter Cartridges Supported by a team of highly experienced and skilled professionals, we bring forth a comprehensive range of PP Wound Cartridge. our client can avail wide rage of PP Wound Cartridge like 10
Additional Information:
- Delivery Time: 1 DAY
-
Cartridge Filter40″ Wound Cartridge Filter
Our Cartridge Filter provides true depth filtration, high dirt holding capacity, and extremely low media migration. String Wound Cartridge Filter is available in a wide variety of lengths and porosities. Especially significant is the availability of cartridge filters in an almost endless combination of media and core material, to handle virtually any chemical and / or environment or temperature. We offer cartridge filter with lengths 10″, 20″, 30″ and 40″.
Features:
- True depth filtration
- Longer service life
- Various core and wind material combinations
- High solids holding capacity
- Chemical and temperature compatibility
- Ease of service and replacement
- Wide choice of porosities, lengths and diameters
- Standard and custom sizes
- Continuous wind process
Additional Information:
- Delivery Time: 1 DAY
-
Cartridge Filter20″ Wound Cartridge Filter
PPW series wound filter cartridge is widely used for removing coarse particles from process fluid. It can remove a wide range of particle size efficiently and economically. The graded pore structure design render filter cartridges high dirt holding capacity at low pressure drop. As it uses high grade filter media and high strength core it can withstand server operating and handling conditions.
-
Cartridge Filter20 Inch Jumbo Wound Cartridge Filter
PPW series wound filter cartridge is widely used for removing coarse particles from process fluid. It can remove a wide range of particle size efficiently and economically. The graded pore structure design render filter cartridges high dirt holding capacity at low pressure drop. As it uses high grade filter media and high strength core it can withstand server operating and handling conditions. Features and Benefits
• Micron ratings from 0.5 to 100 Micron
• Polypropylene or Bleached Cotton media available for a wide range of applications
• Polypropylene or stainless steel center core available High dirt holding capacity
• The media and core made of FDA compliant materials
• Non-foaming and no fabric release
• Low pressure drop at high flow rate
-
Cartridge Filter20″ JUMBO SPUN FILTER
RO Spun polypropylene cartridges offer superior sediment reduction. The thermally bonded polypropylene cartridge utilizes the entire depth of its media to effectively trap suspended particles, providing filtration efficiency and consistent flow rate.
Features
• 4″-inch diameters, 20-inch lengths.
• 5 micron filtration.
• Depth filtration for superior efficiency.
• Smooth texture for minimal fiber migration.
• Polypropylene construction for optimal chemical compatibility. -
Cartridge Filter30″ Spun Filter Cartridge
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
-
Cartridge Filter10″ Spun Cartridge Filter
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
- Cartridge Filter
40″ Spun Cartridge Filter
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
-
Cartridge Filter20″ Spun Filter Cartridge
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents
Cooling Tower
-
Cooling TowerCorrosion Inhibitor (Envkem-1020)
Corrosion inhibitors are designed to prevent metal loss that would otherwise lead to critical system failures in heat exchangers, recirculating water piping, and process cooling equipment. … Corrosion is caused by metals attempting to return to their natural state.
Additional Information:
- Delivery Time: 1 DAY
- Cooling Tower
Non Oxidizing Biocide (Envkem-1040)
Non-oxidising biocides are used to control microbiological activity in a wide range of commercial cleaning, disinfection, environmental hygiene, industrial and process water treatment activities. They are often used in combination with oxidising biocides to provide complete system control.
Additional Information:
- Delivery Time: 1 DAY
- Cooling Tower
Oxidizing Biocide (ENVKEM-1030)
Oxidizing halogen biocides, typically aqueous chlorine or bromine, are often used as the primary biocide in cooling tower disinfection applications. … Often, when the pH of the water in a cooling tower is greater than 8, bromine has traditionally considered to be the oxidizing biocide
Additional Information:
- Delivery Time: 1 day
- Cooling Tower
Oxidizing Biocide
As a quality devoted firm we are engaged in offering an outstanding range of Oxidizing Biocide.
Specification/use:- Ideal to control the growth of bacterial, fungal, and algal slimes
- Available in several capacities
Features:
- Unadulterated
- Longer shelf life
- Easy and safe to use
-
Cooling TowerSCALE INHIBITOR (ENVKEM-1010)
ENVKEM-1010 is an all organic scale and corrosion inhibitor. A blend of phosphonate, and polymers incorporating dispersants. It is designed for the prevention of hardness deposition in recirculating or once through cooling systems using moderate to high hardness make-up water.
Additional Information:
- Delivery Time: 1 DAY
Effluent Treatment
-
Effluent TreatmentFerric Chloride Liquid
Ferric chloride is the coagulant of choice for many industrial and sanitary wastewater treatmentapplications, due to its high efficiency, effectiveness in clarification, and utility as a sludge dewatering agent. The chemical leaves slight residual color, and offers very good turbidity removal.
-
Effluent TreatmentColour Removal Polymer
Paint Remover aerosol spray offered comes with quality constitution support and is backed by strong formula that allows convenient cutting through multiple layers of finishes. The superior working action of the product also allows for quick removal of latex and oil-based paint as well as epoxy and varnish among others. Some of its features include strong working action; suitable for paint removal from different surface types like wood, metal and masonry; suitable for use in areas where brushing is difficult; safe to use; in compliance with defined industry standards.
-
Effluent TreatmentHigh Ph Coagulant
The coagulation-flocculation processes facilitate the removal of SS and colloidal particles. It’s used in the first stage of solids-liquids separation: settling, flotation or filtration. Coagulation is the destabilization of colloidal particles brought about by the addition of a chemical reagent called as coagulant. Flocculation is the agglomeration of destabilized particles into microfloc and after into bulky floccules which can be settled called floc. The addition of another reagent called flocculant or a flocculant aid may promote the formation of the floc. The factors, which can promote the coagulation-flocculation, are the velocity gradient, the time, and the pH. The time and the velocity gradient are important to increase the probability of the particles to come together. Moreover the pH is a prominent factor in the removal of colloids.
-
Effluent TreatmentSodium Aluminate Liquid
Water treatment it is used as an adjunct to water softening systems, as a coagulant aid to improve flocculation, and for removing dissolved silica and phosphates. In construction technology, sodium aluminate is employed to accelerate the solidification of concrete, mainly when working during frost.
Additional Information:
- Packaging Details: 30 kgs can
-
Effluent TreatmentDolomite
It is used for acid neutralization in the chemical industry, in stream restoration projects, and as a soil conditioner. Dolomite is used as a source of magnesia (MgO), a feed additive for livestock, a sintering agent and flux in metal processing, and as an ingredient in the production of glass, bricks, and ceramics.
Additional Information:
- Delivery Time: 1 DAY
-
Effluent TreatmentHydrated Lime Powder
It is revered for its high concentrations of calcium and magnesium carbonate. Soils with low pH levels benefit from a dose of lime powder. It not only helps the soil to rise to basic levels for plant life to thrive, but it also makes the soil an uncomfortable place for insects to hang out
Additional Information:
- Packaging Details: 40 KGS
-
Effluent TreatmentPoly Aluminium Chloride Liquid
Water treatment chemical
Additional Information:
- Packaging Details: 28 kgs carboy
-
Effluent TreatmentHydrochloric Acid
We are the most trusted traders and suppliers of the industry, offering wide array of Hydrochloric Acid. These products are known for their purity and freshness
Envkem Solutions
-
Envkem SolutionsEnvkem 5020SI (Antiscalant)
ENVKEM 5020SI has been developed as an antifoulant for use in Reverse Osmosis and Nano- Filtration systems operating on high silica feed-waters. It is also effective against all common scale forming salts such as calcium carbonate, calcium, barium and strontium sulphate.
-
Envkem SolutionsEnvkem 611( Citric Acid)
Citric Acid is used as a cleaning solution for membrane filters in wastewater and water treatment. Citric acid is also an excellent chelating agent, binding metals. It is also used to remove lime scale from boilers and evaporators.
-
Envkem SolutionsEnvkem 603( Ferric Chloride)
The primary use of ferric chloride is to remove impurities in water and for wastewater treatment. Ferric chloride is also one of the few water treatment chemicals that can sequester odors.
-
Envkem SolutionsEnvkem 9465 ( Cationic Poly)
- cationic polyelectrolytes (CPEs) serve as coagulation and flocculation agents in wastewater treatment due to a.
- synergy of inherent electrostatic interactions and hydrophilic properties. …
- flocculation agents to aggregate impurities and enable water purification.
-
Envkem SolutionsEnvkem 628( Soda Ash)
This treatment method is used if water is acidic (low pH). Soda ash (sodium carbonate) and sodium hydroxide raise the pH of water to near neutral when injected into a water system. Unlike neutralizing filters, they do not cause hardness problems in treated water.
- Envkem Solutions
Envkem PC191T ( Antiscalent)
Antiscalant is used to keep water hardness from precipitating during reverse osmosis treatment of water. The antiscalant also contains a dispersant which prevents iron or aluminum in water from reacting with the antiscalant and making it ineffective.
-
Envkem SolutionsEnvkem 602( Caustic Lye)
Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.
-
Envkem SolutionsEnvkem 98160( Anionic Poly)
Low-molecular-weight anionic polyelectrolytes act as thinning agents and are used to reduce viscosity or prevent flocculation. Most deflocculants are low-molecular-weight anionic polymers that neutralize positive charges such as those on clay edges.
-
Envkem SolutionsEnvkem WB40 FILTER
wound filter cartridge is widely used for removing coarse particles from process fluid. It can remove a wide range of particle size efficiently and economically. The graded pore structure design render filter cartridges high dirt holding capacity at low pressure drop. As it uses high grade filter media and high strength core it can withstand server operating and handling conditions.
- Envkem Solutions
Envkem 607 (Hydrated Lime)
Lime in Water Treatment
- Softening – In water softening, hydrated lime is used to remove carbonate “hardness” from the water.
- pH Adjustment/Coagulation – Hydrated lime is widely used to adjust the pH of water to prepare it for further treatment.
Additional Information:
- Item Code: ENVKEM607
-
Envkem SolutionsEnvkem 621( Sodium Meta Bisulphate)
In water treatment plants, Sodium metabisulfite (SMBS) is commonly used for removal of free chlorine and as a biostatic. Other chemical reducing agents exist (e.g., sulfur dioxide), but they are not as cost-effective as SMBS .
Additional Information:
- Packaging Details: 25 kgs
- Envkem Solutions
ENVKEM 630(NITRIC ACID)
Nitric Acid is preferred because of its oxidizing nature. Nitric acid is added in water samples for heavy metal analysis during the sampling of water.
- Envkem Solutions
ENVKEM 604(HYDROCHLORIC ACID)
Hydrochloric acid is a reactive liquid, it serves in the production of water treatment chemicals, batteries and feed phosphates. Other applications include its use for metal surface treatments, removing scale and rust from steel during the steel pickling process.
-
Envkem SolutionsEnvkem MB20 FILTER
20″Spun polypropylene cartridges offer superior sediment reduction. The thermally bonded polypropylene cartridge utilizes the entire depth of its media to effectively trap suspended particles, providing filtration efficiency and consistent flow rate.
- Envkem Solutions
Envkem MB30 FILTER
30″ Spun polypropylene cartridges offer superior sediment reduction. The thermally bonded polypropylene cartridge utilizes the entire depth of its media to effectively trap suspended particles, providing filtration efficiency and consistent flow rate.
-
Envkem SolutionsEnvkem 610( Sodium Hypo Chlorite)
Sodium Lauryl Sulfate (SLS), also known as Sodium dodecyl sulfate, is a widely used surfactant in cleaning products, cosmetics, and personal care products. SLS is a highly effective anionic surfactant used to remove oily stains and residues. It is found in high concentrations in industrial products, including engine degreasers, floor cleaners, and car wash products, where workplace protections can be implemented to avoid unsafe exposures. SLS is also used in lower concentrations in household and personal care products such as cleaning products, toothpastes, shampoos, and shaving foams.
SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products.
SLS is safe for use in cleaning products. It has been through numerous reviews. There is no direct or circumstantial evidence that this ingredient has any carcinogenic potential. The studies that have been conducted on SLS indicate it is safe under proper conditions of use. Workplace exposures to SLS could be expected to be significantly higher than in the consumer use setting due to either the higher use concentrations and/or longer duration of use that can occur in the workplace. Since the primary side-effect of SLS, namely skin irritation, is dependent on the level and duration of exposure, consumer product formulators design products to avoid or minimize this effect during consumer use.
Polymers
-
PolymersAnionic Poly Electrolyte (Liquid)
Anionic polymers are often used with metal coagulants. … Polymers are effective over a wider pH range than inorganic coagulants. They can be applied at lower doses, and do not consume alkalinity. They produce smaller volumes of more concentrated, rapidly settling floc.
-
PolymersCationic Polyelectrolyte Powder
Features:
- High quality
- Highly reliable
- Flocking in water treatment.
-
PolymersCationic Polymer Liquid
CATIONIC POLYELECTROLYTE LIQUID. … This is a liquid organic cationic polymer used to remove oil and suspended soilds from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc. It is suitable foruse in air flotation separation, gravity settling and direct filtration.
- Polymers
Anionic Polymer Powder
- Higher water retention and open time
- Higher strength development of the mortar
- Improved workability
- Raised adhesion to a spread of substrates
- Improved wetting of the substrate
- Higher flexural strength and adaptability
- Raised impact and abrasion resistance
- Freeze/thaw resistance
Raw Material
-
Raw MaterialSodium Lauryl Sulfate
Sodium Lauryl Sulfate (SLS), also known as Sodium dodecyl sulfate, is a widely used surfactant in cleaning products, cosmetics, and personal care products. SLS is a highly effective anionic surfactant used to remove oily stains and residues. It is found in high concentrations in industrial products, including engine degreasers, floor cleaners, and car wash products, where workplace protections can be implemented to avoid unsafe exposures. SLS is also used in lower concentrations in household and personal care products such as cleaning products, toothpastes, shampoos, and shaving foams.
SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products.
SLS is safe for use in cleaning products. It has been through numerous reviews. There is no direct or circumstantial evidence that this ingredient has any carcinogenic potential. The studies that have been conducted on SLS indicate it is safe under proper conditions of use. Workplace exposures to SLS could be expected to be significantly higher than in the consumer use setting due to either the higher use concentrations and/or longer duration of use that can occur in the workplace. Since the primary side-effect of SLS, namely skin irritation, is dependent on the level and duration of exposure, consumer product formulators design products to avoid or minimize this effect during consumer use.
- Raw Material
Sodium Tri Polyphosphate
Sodium tripolyphosphate (technical grade) Sodium tripolyphosphate is an excellent cleaning agent and is used in detergent, ceramic tiles, water treatment, metal treatment and paints.
Product specifications:Formula Na5P3O10 Synonyms Pentasodium triphosphate
Pentasodium tripolyphosphate
Sodium triphosphateGrade Technical: anhydrous and hydrate
Sodium tripolyphosphate is produced in the following technical grades:- Fine
- Granular (low density granular, medium density granular, high density granular)
- High temperature rise
- Medium temperature rise
- Low temperature rise
Specifications Anhydrous:
pH (1% solution) 9.2-10.2
P2O5: 56.5% minimumHydrate:
pH (1% Solution) 9.2-10.2
P2O5: 46.5-47.5%Applications Detergent, cleaning agent, ceramic tiles, water treatment, metal treatment and paints Packaging - 25kg polypropylene bag with PE liner
- 25kg paper bag with PE liner
- As per customer”s request
- Raw Material
Ferric Chloride Liquid
The most common use of ferric chloride is in solution. When dissolved it forms a light brown aqueous solution with a faint hydrochloric acid odor. It is highly corrosive to most metals and probably corrosive to tissue. It is noncombustible and primarily used in sewage treatment and water purification
-
Raw MaterialCitric Acid Monohydrate
It is a natural preservative and excellent chelating agent. It is used to remove limescale from boilers and evaporators and can be used to soften water. Citric acid is widely used as a pH adjusting agent in creams and gels and can be used as a successful alternative to nitric acid in passivation of stainless steel.
Additional Information:
- Packaging Details: 25 kg bag
-
Raw MaterialCaustic Soda Flakes
Caustic soda (sodium hydroxide) is a versatile alkali. Its main uses are in the manufacture of pulp and paper, alumina, soap and detergents, petroleum products and chemical production. Other applications include water treatment, food, textiles, metal processing, mining, glass making and others.
Additional Information:
- Packaging Details: 50 kgs bag
-
Raw MaterialLow pH Coagulant (PAC Liquid)
- Effective at low dosage levels.
- Perform well over a wide pH range
- Improve throughput and cake solids.
- Achieve high solids capture.
- Easily sealable in water
- Dry product minimizes storage requirement.
- Multiple applications.
- Raw Material
Sodium Aluminate Liquid
Water treatment it is used as an adjunct to water softening systems, as a coagulant aid to improve flocculation, and for removing dissolved silica and phosphates. In construction technology, sodium aluminate is employed to accelerate the solidification of concrete, mainly when working during frost.
Additional Information:
- Delivery Time: 1 DAY
-
Raw MaterialFerrous Sulphate Powder
Our organization is actively committed towards offering an excellent range of Ferrous Sulphate to the valued customers. Formulated using high-quality iron and pure sulphuric acid, these chemicals are used in various chemical process and formulating other chemicals. Further, we ensure our customers that these chemicals are precisely tested against various quality parameters before final delivery. We offer them at market leading prices.
Features:
- Precise composition
- Purity
- Stability
Additional Information:
- Packaging Details: 25 & 50 KGS
- Raw Material
TSP (Tri Sodium Phosphate)
Trisodium phosphate (TSP) is an inorganic salt used as industrial detergents, metal treatment and in toilet floor cleaners. TSP is pure cleaning power. Used as a water softener; for the treatment of boiler water; as a paint remover; in photographic developers; for tanning leather; for manufacturing paper; for clarifying sugar.
Also, it is a common laboratory reagent. Use to dissolve dirt, grease, and mildew from siding, decks, masonry, boats, campers. To prepare surfaces before painting or staining wash with TSP. Trisodium phosphate is an approved food additive in the U.S., European Union and other countries of the world. It may be added to foods and beverages or smoothies and green drinks. The primary function of trisodium phosphate is acidity regulation. It is commonly present in dry, extruded cereals. Together with other phosphates, it modifies cereal color, aids the cereal’s flow through the extruder and provides phosphorus fortification. It is also commonly present in cheese sauces as an emulsifier. Trisodium phosphate is a strong chemical and can cause severe eye damage and can burn unprotected skin. Poisoning occurs if you swallow, breathe in, or spill large amounts of this substance on your skin. -
Raw MaterialDefoamer Liquid
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. … The additive is used to prevent formation of foam or is added to break a foam already formed.
-
Raw MaterialSulphuric Acid
Sulfuric acid is the acid of choice for many pH neutralization applications due to its high effectiveness and strong acidic nature. Typical Applications: Industrial and sanitary wastewater. pH neutralization. - Effluent Treatment
Hydrochloric Acid
We are the most trusted traders and suppliers of the industry, offering wide array of Hydrochloric Acid. These products are known for their purity and freshness -
Raw MaterialSodium Hypo Chlorite
Backed by rich industry experience, we are presenting vast variety of Sodium Hypochlorite for Bleaching. It contains 5-6% sodium hypochlorite and 0.01-0.05% sodium hydroxide, which is most commonly used to detain the breakdown of sodium hypochlorite into sodium chlorate and sodium chloride. These chemicals are formulated using high-grade ingredients with the aid of sophisticated machinery and technology. Further, we formulate our entire range in compliance with the industry set norms and guidelines.
-
Raw MaterialLime-90%
Its also called Slaked Lime | Calcium Hydroxide | Pickling Lime.
…
Its usages :- A flocculant, in water and sewage treatment and improvement of acid soils.
- An ingredient in whitewash, mortar, and plaster.
- An ingredient in baby formula milk.
- A home remedy for throat infections as well as sprains.
- A chemical reagent.
Additional Information:
- Packaging Details: 40kg bag
-
Raw MaterialAlum (Non Ferric)
The Non Ferric Alum (Aluminium Sulphate) offered by us is used mainly in the pulp and paper industry and as a flocculating agent or coagulant in water and waste treatment for clarifying and or purifying sewage and water for clarifying fats, oils and petroleum products as a leather tanning agent as a pH stabilizer …
-
Raw MaterialTrichloro Iso Cyanuric Acid (TCCA90)
TCC is an excellent source of chlorine for the control of biofouling in swimming pools, industrial water systems and cooling water system. TCCA has been proved to be a better and more economical alternative to bleaching powder and sodium hypochlorite for all kinds of chlorination applications.
SpecificationProductname Trichloro Iso Cyanuric Acid-90%
Ph@27*c 2.85(1% Solution)
Appearance White Fine Powder
Moisture,% 0.36
Available Chlorine (as Cl),% 92.50
Packing – 25/50 Kgs Drum Packing -
Raw MaterialHydrogen Peroxide
Hydrogen Peroxide offered finds use as germicidal agent and supports eradicating disease organisms through oxidation. As a natural effective sanitizer, it supports killing microorganisms through oxidization process and upon reacting with organic material it breaks down into oxygen and water. Some of its common uses include as a mild antiseptic on skin to prevent infection of scrapes, burns, minor cuts; used as mouth rinse to remove mucus and other uses.
Features:
- Hygienic packaging
- Highly effective
- Longer shelf life
Product specifications:
Formula H2O2 Specification Chemical family: PEROXYGEN
CAS No.: 7722-84-1
Hazard class: NFPA hazard class II oxidiser
UN Number: 2014Grade Hydrogen peroxide is produced in two concentrations: 35 per cent and 50 per cent Properties H2O2 – 35% H2O2 – 50% H2O2 35% 50% Water 65% 50% Specific gravity @ 20oC 1.13 1.19 pH 2.0-3.0 1.0-3.0 % stability, 3 hours 99.6 99.6 H2O2, gms/l 369 600 Grades Applications Standard grade – 50% Standard LT grade – 50%
AP grade – 35%
Environment friendly replacement to chlorine for: - Textile bleaching
- Pulp and paper bleaching
- Leather tanning
- Electronic – PCB copper etching
Base chemical – 35% and 50% H2O2
- Raw Material
White Dolomite Powder
We are one of the manufacturer of a comprehensive range of Dolomite is also known as the “calcium magnesium carbonate”. we offer our range in different specifications that meet the individual requirement of our clients. Dolomite is a unique double carbonate mineral containing Magnesium and Calcium Carbonates.
Dolomite is also used as the substrate in saltwater aquariums to help buffer changes in pH of the water.
RO Chemicals
-
RO ChemicalsRO Antiscalant Chemical
Our organization is dealing in offering Antiscalant Chemical to our clients. It is free from all types of inflammation and is highly effective. It is free from all sorts of adulterants and is composed in an accurate manner. Our range is packaged in excellent quality material for purpose of sale. It has been formulated in unique manner at our state of art center using best quality ingredients and other material.
Features:
- Prolong effects
- No side effects
-
RO ChemicalsRO- LOW PH Cleaning Chemicals (Inorganic Cleaner)
Reverse Osmosis (RO) membranes have been successfully used on a … of the lost performance of an element that was heavily fouled while treating surface lake water. … showed that low pH cleaning was key to quickly returning the rejection to … was found to be more effective than using cleaning chemicals in a normal …
Additional Information:
- Delivery Time: 1 DAY
-
RO ChemicalsPH Booster Drinking Water
We are successfully ranked amongst the top manufacturers and suppliers of premium quality array of Pure Drinking Water. Our provided water is carefully purified under the surveillance of adept professionals using modern reverse osmosis systems at our production unit. This water is widely used for drinking and many other purposes. Owing to its purity, this water is highly acclaimed by the patrons. Moreover, our clients can avail this water at industry leading prices.
Features:
- Free from impurities
- Long shelf life
- Precisely purify
-
RO ChemicalsRO High Ph Cleaner (Organic Cleaner)
High pH. Many naturally occurring organic compounds contain carboxylic acid groups. At low to neutral pH values these groups contain a hydrogen ion, which means there is no net charge on the molecule. At high pH levels however, the hydrogen ion will dissociate and leave a negative net charge. The presence of these charges make the organic molecular much more water loving (hydrophilic).
In the case of reverse osmosis (RO) membranes, a high pH cleaning solution will alter the membrane itself. Acidic groups on the membrane molecule will dissociate at high pH and result in a more hydrophilic membrane. This may aid in membrane cleaning, depending upon the chemical nature of the fouling substance.
Sodium hydroxide (NaOH) should be used to adjust the pH of the cleaning solution. If at all possible, RO permeate or deionized water should be used for high pH cleaning. Tap water may have sufficient calcium (CA 2) and bicarbonate (HCO-3) present to cause the precipitation of calcium carbonate (CaCO3) when the pH is increased.
- RO Chemicals
Ro Antioxidant Chemical
The term “antioxidant” is mostly used for two entirely different groups of substances: industrial chemicals that are added to products to prevent oxidation, and naturally occurring compounds that are present in foods and tissue. The former, industrial antioxidants, have diverse uses: acting as preservatives in food and cosmetics, and being oxidation-inhibitors in fuels
Additional Information:
- Delivery Time: 1 DAY
Sewage Treatment
-
Sewage TreatmentDisinfectant
₹0.00The information presented in this section will provide a general guideline for selecting a particular disinfectant for use with a given agent.
The best way of ascertaining the suitability of a disinfectant against a particular agent is to challenge that agent with the disinfectant at the manufacturer’s recommended concentration. A brief description of the mode of action of each class of chemical disinfectant is given below.
Although physical methods are often superior to chemical disinfection / sterilization, it is not practical to autoclave or subject many items to high heat, especially if the items can be damaged through repeated exposure to heat. Treatment of inert surfaces and heat labile materials can be accomplished through the use of disinfectants, provided that the following factors are considered
- Sewage Treatment
Defoamer
- Excellent performance at very low concentrations of 10-100ppm
- Stable over wide ph range
- Excellent foam control persistence
- Very good foam knock down performance
- Easy to disperse in aqueous systems
- High solid content
- Very economical for bulk applications
-
Sewage TreatmentBioculture Liquid
Our firm has hands on experience for providing a comprehensive range of Bio Culture Liquid chemical to the esteem clients. These are the precisely obtained and formulated chemical used for many industrial purposes. The continuous development in chemical science motivates industrial experts to formulate various kinds of new chemicals which are need of the present market.
Features:
- No side effect
- Highly effective
- Eco-friendly
-
Sewage TreatmentBio Culture – Powder
We use Aerobic Bioculture in various applications such as agriculture, poultry, for general use in the ETP, sewage treatment, and water treatment etc. Our solution consists of beneficial bacteria which is formulated with superior quality chemicals.
Additional Information:
- Item Code: ENVKEM-4020A
STP & ETP Chemicals
- STP & ETP Chemicals
Antifoam
We supply a wide array of anti foam, which is used in effluent treatment plants and sewage treatment plants. A defoamer or an anti-foam is a chemical.
-
STP & ETP ChemicalsSodium Hypochlorite
Backed by rich industry experience, we are presenting vast variety of Sodium Hypochlorite for Bleaching. It contains 5-6% sodium hypochlorite and 0.01-0.05% sodium hydroxide, which is most commonly used to detain the breakdown of sodium hypochlorite into sodium chlorate and sodium chloride. These chemicals are formulated using high-grade ingredients with the aid of sophisticated machinery and technology. Further, we formulate our entire range in compliance with the industry set norms and guidelines.
Additional Information:
- Packaging Details: 35 kg Carboy
Surface Disinfectants
-
Surface DisinfectantsSURFACE CLEANER / DISINFECTANT
The liquid Surface cleaner is all-purpose and can be used in cleaning various surfaces in water and also alone. It is a powerful disinfectant that protects against 100 illness-causing germs. The cleaner is effective in removing tough stains and leaves a refreshing fragrance
UF Additives
- UF Additives
RO Organic Cleaner
Organic soils encompass a broad range and include food soils (such as fat, grease, protein, and carbohydrate), living matter (such as mold, yeast and bacteria) and petroleum soils (such as motor oil, axle grease and cutting oils). Traditionally, these soils have been removed using alkaline cleaners or solvents. Now, however, more modern, bio-based surfactants are used to cut organic soils.
Additional Information:
- Delivery Time: 1 DAY
- UF Additives
Inorganic Cleaner
Inorganic soils include rust, scale, hard water deposits and minerals such as sand, silt and clay. Oftentimes acids are used to remove inorganic deposits such as rust and scale. Minerals are often cleaned with general purpose or acid-type cleaner
Additional Information:
- Delivery Time: 1 DAY
- Packaging Details: 10 KG, 25 KG, 40 KG
Waste Water Treatment
- Waste Water Treatment
Ferric Chloride Liquid
The most common use of ferric chloride is in solution. When dissolved it forms a light brown aqueous solution with a faint hydrochloric acid odor. It is highly corrosive to most metals and probably corrosive to tissue. It is noncombustible and primarily used in sewage treatment and water purification
Additional Information:
- Delivery Time: 1 DAY
- Waste Water Treatment
Low PH Coagulant
In water treatment it is used as an adjunct to water softening systems, as a coagulant aid to improve flocculation, and for removing dissolved silica and phosphates. In construction technology, sodium aluminate is employed to accelerate the solidification of concrete, mainly when working during frost.
- Waste Water Treatment
Sodium Aluminate Liquid
In water treatment it is used as an adjunct to water softening systems, as a coagulant aid to improve flocculation, and for removing dissolved silica and phosphates. In construction technology, sodium aluminate is employed to accelerate the solidification of concrete, mainly when working during frost.
- Waste Water Treatment
Defoamer Liquid
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. … The additive is used to prevent formation of foam or is added to break a foam already formed.
- Waste Water Treatment
Sodium Hypochlorite
Sodium hypochlorite (NaOCl) is a compound that can be effectively used for water purification. It is used on a large scale for surface purification, bleaching, odor removal and water disinfection.
Sodium hypochlorite is a clear, slightly yellowish solution with a characteristic odor.
Sodium hypochlorite has a relative density of is 1,1 (5,5% watery solution).
As a bleaching agent for domestic use it usually contains 5% sodium hypochlorite (with a pH of around 11, it is irritating). If it is more concentrated, it contains a concentration 10-15% sodium hypochlorite (with a pH of around 13, it burns and is corrosive).
Sodium hypochlorite is unstable. Chlorine evaporates at a rate of 0,75 gram active chlorine per day from the solution. Then heated sodium hypochlorite disintegrates. This also happens when sodium hypochlorite comes in contact with acids, sunlight, certain metals and poisonous and corrosive gasses, including chlorine gas. Sodium hypochlorite is a strong oxidator and reacts with flammable compounds and reductors. Sodium hypochlorite solution is a weak base that is inflammable.Additional Information:
- Item Code: ENVKEM-4010
- Waste Water Treatment
Hydrochloric Acid
Hydrochloric acid or muriatic acid is a colorless inorganic chemical system with the formula H
2O:HCl. Hydrochloric acid has a distinctive pungent smell. It is classified as strongly acidic and can attack the skin over a wide composition range, since the hydrogen chloride completely dissociates in aqueous solution.Hydrochloric acid is the simplest chlorine-based acid system containing water. It is a solution of hydrogen chloride and water, and a variety of other chemical species, including hydronium and chloride ions. It is an important chemical reagent and industrial chemical, used in the production of polyvinyl chloride for plastic. In households, diluted hydrochloric acid is often used as a descaling agent. In the food industry, hydrochloric acid is used as a food additive and in the production of gelatin. Hydrochloric acid is also used in leather processing.
- Effluent Treatment
Dolomite
It is used for acid neutralization in the chemical industry, in stream restoration projects, and as a soil conditioner. Dolomite is used as a source of magnesia (MgO), a feed additive for livestock, a sintering agent and flux in metal processing, and as an ingredient in the production of glass, bricks, and ceramics.
Additional Information:
- Delivery Time: 1 DAY
- Effluent Treatment
Hydrated Lime Powder
It is revered for its high concentrations of calcium and magnesium carbonate. Soils with low pH levels benefit from a dose of lime powder. It not only helps the soil to rise to basic levels for plant life to thrive, but it also makes the soil an uncomfortable place for insects to hang out
Additional Information:
- Packaging Details: 40 KGS
