Products & Services
We are the leading manufacturer, supplier and service provider of Water &waste water treatment Plants and chemicals , Operation and maintenance of WTP & WWTP , RAW/BULK CHEMICALS, Manufactures of sewage treatment plant , RO & waste water treatment plant and waste water treatment plant equipment's - volute multi disc screw press , Multi effect Evaporator and Bag filters and cartridge Filters
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
INDUSTRIAL CHEMICALS & ACIDSANIONIC POYMER POWDER ( ENVKEM-98160)
ENVKEM 98160 – ANIONIC POLYMER POWDER
APPLICATION:
ENVKEM 98160 anionic is high efficiency polyelectrolyte. Applications include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; De-watering of pulp and sludges for recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery liquor or disposal.
ENVKEM 98160 anionic applications is sedimentation and clarification of neutral leach in zinc and uranium. Metal hydroxides filtration of base metal sulphides, oxides and hydroxide concentrate.
FEATURES:
- Effective at low dosages.
- Completely miscible in water.
- Rapid settling.
- Increased throughput.
- Marked increase in underflow density.
- Efficient filter cake washing.
- Improved filter clarity.
- Higher filter rate.
PRODUCT SPECIFICATION:
Physical Appearance WHITE CRYSTALLINE POWDER Ionic Charge ANIONIC Solubility in water Complete Ph of 0.5% Solution 5 – 8 Specific Gravity 1 – 2 Viscosity of 0.5% Solution 3000 cps DIRECTIONS FOR USE:
ENVKEM 98160 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50˚C to accelerate the dissolution. Higher temperatures are not recommended ENVKEM 98160 dosage for clarification is normally between 10 to 40ppm despending on suspended solids.
POLYELECTROLYTE
LIMITATIONS AND HANDLING:
Harmful if swallowed. Avoid contact with skin and eyes. If material gets on skin, wash with plenty of water. If eyes are affected, immediately flush with water for at least 10 minutes and get medical attention. Use protective clothing, gloves and goggles. Wash out empty containers thoroughly with water before disposal.
STORAGE:
Keep container tightly closed in a cool place.
STP/ETP Chemicals
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
STP/ETP CHEMICALSAntifoam
We supply a wide array of anti foam, which is used in effluent treatment plants and sewage treatment plants. A defoamer or an anti-foam is a chemical.
-
RO CHEMICALSPH Booster Drinking Water
We are successfully ranked amongst the top manufacturers and suppliers of premium quality array of Pure Drinking Water. Our provided water is carefully purified under the surveillance of adept professionals using modern reverse osmosis systems at our production unit. This water is widely used for drinking and many other purposes. Owing to its purity, this water is highly acclaimed by the patrons. Moreover, our clients can avail this water at industry leading prices.
Features:
- Free from impurities
- Long shelf life
- Precisely purify
-
STP/ETP CHEMICALS
Defoamer
- Excellent performance at very low concentrations of 10-100ppm
- Stable over wide ph range
- Excellent foam control persistence
- Very good foam knock down performance
- Easy to disperse in aqueous systems
- High solid content
- Very economical for bulk applications
-
STP/ETP CHEMICALSBIOCULTURE (LIQUID)
Our firm has hands on experience for providing a comprehensive range of Bio Culture Liquid chemical to the esteem clients. These are the precisely obtained and formulated chemical used for many industrial purposes. The continuous development in chemical science motivates industrial experts to formulate various kinds of new chemicals which are need of the present market.
Features:
- No side effect
- Highly effective
- Eco-friendly
-
STP/ETP CHEMICALSBIO CULTURE – (Powder)
We use Aerobic Bioculture in various applications such as agriculture, poultry, for general use in the ETP, sewage treatment, and water treatment etc. Our solution consists of beneficial bacteria which is formulated with superior quality chemicals.
Additional Information:
- Item Code: ENVKEM-4020A
-
STP/ETP CHEMICALSColour Removal Polymer
Paint Remover aerosol spray offered comes with quality constitution support and is backed by strong formula that allows convenient cutting through multiple layers of finishes. The superior working action of the product also allows for quick removal of latex and oil-based paint as well as epoxy and varnish among others. Some of its features include strong working action; suitable for paint removal from different surface types like wood, metal and masonry; suitable for use in areas where brushing is difficult; safe to use; in compliance with defined industry standards.
RO Chemicals
-
-
-
-
RO CHEMICALSRO SILICA ANTISCALANT ( ENVKEM-5030)
ENVKEM 5020/30 (Super Antiscalant)
OTHERS (Conventional Antiscalant)
1) High specific gravity ,Low viscosity (Solid contents /Active Ingredients @39%)
1) Low specific gravity ,High viscosity (Solid contents /Active Ingredients @15-20%)
2) C.V> 600 (Phospoines/Amines,Ter /Co-Polymer)
2) C.V> 400-500 (HEDP /ATMP/Homo /Co-Polymer)
3) Higher LSI +3.2 3) Lower LSI +2.5 4) Triple filtered 4) Single / Doubled filtered 5) Double DI Water as product solvent 5) DM /RO Water as product solvent 6) Light yellow to Brown ,slight Odour 6) Colour ,Smells 7) Most economical average price
7) Costlier average price @Rs.350/-
8) RejectControl Parameters i) Silica limit = 300-325 +ppm
ii) Sulphate limit =3500 -6500 ppm
iii) Iron limit = 1.5-4.0 ppm
8) RejectControl Parameters i) Silica limit = 200-250 max ppm
ii) Sulphate limit =2500 -3500 ppm
iii) Iron limit = 1.5-3.0 ppm
Comparison Chart Between Super Antiscalant and Other Antiscalant Abstract: After using ENVKEM Antiscalant permeate ratio exceeded, permeate TDS /conductivity lowered, pressure differential lowered, Membrane Cleaning frequency extended and ensures longer Membrane Life of 3-5 years.
SOFTWARE SUPPORT SYSTEM
- Based on water chemistry Pressure :- 50-100
- Based on operation Recovery :- 1-75%
- Based on design Running hour :- 0-24 hr
DOSING PATTERN OF ANTISCALANT ( ENVKEM 5020/30 )
TDS
(Feed)
Conductivity
(Feed)
Total Hardness
(Feed)
Total Alkalinity
(Feed)
Chloride
(feed)
Ph
(Feed)
SDI
(NTU)
(Feed)
Feed Water
Temp
(ºC)
Silica
Reactive
(Reject)
Iron
(FeO2)
(Reject)
Fluoride
(Calcium)
(Reject)
Calcium
Sulphate
(Reject)
Strontium
Sulphate
(Reject)
Barium Sulphate
(Reject)
Dosing Pattern
In ppm
100-1000
135-1350
1-50
1-50
1-50
4.0-6.5
1.0-2.0
5-15
1-50
0.1-0.5
1-5
1.0-500
10-25
0.1-0.2
2.0 -3.0
1000-3000
1350-40500
50-300
50-200
50-300
6.5-7.2
2.0-3.0
15-22
50-100
0.5-1.0
5-10
500-1000
25-50
0.3-0.5
3.0 – 5.0
3000-6000
4050-6750
300-500
200-300
200-300
7.2-7.5
3.0-5.0
22-27
100-200
1.0-1.5
10-20
1000-1500
50-100
0.5-1.0
6.0 – 10.0
6000 -10000
6750 -10800
500-700
300-500
300-500
7.5-8.0
5.0-5.5
27-30
200-275
1.5-2.0/ 515-
1grade
20-35/ 516-
1grade
1500-2000/ 516-
1grade
100-125/ 516-
1grade
1.0-1.5
10.0 – 12.0
10000-15000
10800-16200
700-900
500-600
500-600
8.0-9.0
5.5-6.0
30-35
275-350
2.0-2.5
35-45
2000-3000
125-150
1.5-2.0/ 516-
1grade
12.0 – 15.0
Input Output
NOTE: – Working LSI with ENVKEM 5020 +2.6
In General 6-10ppm in Feed is a optimum Dosage.
ATTENTION ALL RO OEM’S / END USERS
WHY ENVKEM ANTISCALANT?
(FOR A LONGER MEMBRANE LIFE)
- The Best ingredients Phosphino , Amines & multi-Polymer or amino phosphate.
- Higher specific gravity due to higher active ingredients /solid content @ 23-45%
- Highest ever chelation value (c.v)of Antiscalant is >600 c.v while market trend is merely 400-500 c.v
Antiscalant.
- Triple filtration process applied during manufacturing process in place of single or double filtration.
- Using double deionised water as product solvent in place of DM Water.
- Use only higher chelation & distortion value Antiscalant (ENVKEM 5020) for higher permeate recovery percentage ,lower permeate conductivity,optimized pressure differential ,extended cleaning frequency & a longer membrane life of 3-5 years.
- After using ENVKEM additive soda ash consumption minimize or even eliminate that has a major drawback in terms of major cost addition, TDS addition and sludge handling cost.
Antiscalant quality confirmation procedure by following comparative jar test:-
- Take 2 ltr brine water sample containing high hardness, high silica, high iron, high sulphates and high fluorides
- Test all water parameters i.e.hardness, silica, iron, sulphates, fluoride etc of above water.
- Divide this 2 ltr brine water in 1 ltr each jar.
- Add and stir 5-9mg/ltr of each Antiscalant in two separate jars i.e.microchem vs any other Antisacalant.
- After addition and proper stirring further test all water parameters and observe chelation or salt reduction of each Antiscalant and see major difference.
-
-
-
-
RO CHEMICALS
PH Booster Drinking Water
We are successfully ranked amongst the top manufacturers and suppliers of premium quality array of Pure Drinking Water. Our provided water is carefully purified under the surveillance of adept professionals using modern reverse osmosis systems at our production unit. This water is widely used for drinking and many other purposes. Owing to its purity, this water is highly acclaimed by the patrons. Moreover, our clients can avail this water at industry leading prices.
Features:
- Free from impurities
- Long shelf life
- Precisely purify
Cartridge Filters
-
CARTRIDGE FILTERS10″ Jumbo Wound Filter
PP Wound Filter Cartridge manufactured using a high quality raw material. These Industrial Wound Filter Cartridges Supported by a team of highly experienced and skilled professionals, we bring forth a comprehensive range of PP Wound Cartridge. our client can avail wide rage of PP Wound Cartridge like 10″ PP Wound Cartridge, 20″ PP Wound Cartridge, 30″ PP Wound Cartridge, 40″ PP Wound Cartridge, 10″ Jubbo PP Wound Cartridge, 20″ Jumbo PP Wound Cartridge. The double O-ring sealing system ensures positive sealing of the filter cartridge within the housing and virtually eliminates and potential for bypass. The all PP construction provides excellent chemical compatibility in a wide variety of process streams.
-
CARTRIDGE FILTERS30″ Wound Cartridge Filter
PP Wound Filter Cartridge manufactured using a high quality raw material. These Industrial Wound Filter Cartridges Supported by a team of highly experienced and skilled professionals, we bring forth a comprehensive range of PP Wound Cartridge. our client can avail wide rage of PP Wound Cartridge like 10
Additional Information:
- Delivery Time: 1 DAY
-
CARTRIDGE FILTERS40″ Wound Cartridge Filter
Our Cartridge Filter provides true depth filtration, high dirt holding capacity, and extremely low media migration. String Wound Cartridge Filter is available in a wide variety of lengths and porosities. Especially significant is the availability of cartridge filters in an almost endless combination of media and core material, to handle virtually any chemical and / or environment or temperature. We offer cartridge filter with lengths 10″, 20″, 30″ and 40″.
Features:
- True depth filtration
- Longer service life
- Various core and wind material combinations
- High solids holding capacity
- Chemical and temperature compatibility
- Ease of service and replacement
- Wide choice of porosities, lengths and diameters
- Standard and custom sizes
- Continuous wind process
Additional Information:
- Delivery Time: 1 DAY
-
CARTRIDGE FILTERS20″ Wound Cartridge Filter
PPW series wound filter cartridge is widely used for removing coarse particles from process fluid. It can remove a wide range of particle size efficiently and economically. The graded pore structure design render filter cartridges high dirt holding capacity at low pressure drop. As it uses high grade filter media and high strength core it can withstand server operating and handling conditions.
-
CARTRIDGE FILTERS20 Inch Jumbo Wound Cartridge Filter
PPW series wound filter cartridge is widely used for removing coarse particles from process fluid. It can remove a wide range of particle size efficiently and economically. The graded pore structure design render filter cartridges high dirt holding capacity at low pressure drop. As it uses high grade filter media and high strength core it can withstand server operating and handling conditions. Features and Benefits
• Micron ratings from 0.5 to 100 Micron
• Polypropylene or Bleached Cotton media available for a wide range of applications
• Polypropylene or stainless steel center core available High dirt holding capacity
• The media and core made of FDA compliant materials
• Non-foaming and no fabric release
• Low pressure drop at high flow rate
-
CARTRIDGE FILTERS20″ JUMBO SPUN FILTER
RO Spun polypropylene cartridges offer superior sediment reduction. The thermally bonded polypropylene cartridge utilizes the entire depth of its media to effectively trap suspended particles, providing filtration efficiency and consistent flow rate.
Features
• 4″-inch diameters, 20-inch lengths.
• 5 micron filtration.
• Depth filtration for superior efficiency.
• Smooth texture for minimal fiber migration.
• Polypropylene construction for optimal chemical compatibility. -
CARTRIDGE FILTERS30″ Spun Filter Cartridge
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
-
CARTRIDGE FILTERS10″ Spun Cartridge Filter
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
-
CARTRIDGE FILTERS40″ Spun Cartridge Filter
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents·
-
CARTRIDGE FILTERS20″ Spun Filter Cartridge
SPUN FILTER CARTRIDGE (POLYPROPYLENE) Filters thermally bonded polypropylene spun filter cartridge utilize graded density media that is well suited for clarification & pre filtration applications where high particle removal is essential.
The all-propylene construction provides excellent thermal & chemical compatibility with high & low pH chemicals. Also the graded density design efficiently captures contaminants throughout the media matrix resulting in excellent contaminant holding capacity, increased lifetime & low pressure drop.
In water applications, polypropylene media does not impart taste, odor or colors into the solution. For industrial applications, polypropylene offers superior chemical resistance and is not prone to bacterial attack. The thermal bonding process of the media eliminates the need for a core collapse. This process also greatly reduces fiber migration. Spun Bonded Cartridges can be used either as a pre-filter or final filter for industrial, chemical process, pharmaceutical, food/beverage, cosmetics, water and other applications.
Spun cartridges are available in a wide range of lengths and micron sizes. Two sizes are available- standard and jumbo as per your flow rate and volume requirements.
FEATURES & BENEFITS: High flow rates and low pressure drops· Wide chemical compatibility· Particles removed through the entire depth of filter cartridge.· Graded density structure for maximum dirt holding capacity· Supported core for overall strength· Thermal bonding process stops media migration· Contains no resin binders, solvent ,wetting or antistatic agents
Bag Filters
-
BAG FILTERS4 X 10″ LONG BAG FILTER
Filter Bags – Liquid Filtration. we offer the selection in 4″ x 10″
Lightweight and durable, these filter bags are used for air pollution control and filtration of paints & thinners as well.Features:
- High flow rate
- Low pressure drop
- Excellent performance
-
BAG FILTERSBag Filter 7 x 32
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
-
BAG FILTERS
Bag Filter 4 x 20
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
-
BAG FILTERSBag Filter 7 x 16
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
-
BAG FILTERS
BAG FILTER 7 X 42
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
-
BAG FILTERS
4 x 10″ Bag Filter
In every industry that needs bag filter, these bag filters are placed inside of bag filter housings for the purpose of purification by removing solids from wastewater. They are typically used in the treatment of industrial process water, wastewater, groundwater, and cooling water, along with many others.
Additional Information:
- Delivery Time: 1 DAY
Polymers
-
-
POLYMERSANIONIC POLYELECTROLYTE (Liquid)(ENVKEM 9010)
Anionic polymers are often used with metal coagulants. … Polymers are effective over a wider pH range than inorganic coagulants. They can be applied at lower doses, and do not consume alkalinity. They produce smaller volumes of more concentrated, rapidly settling floc.
-
POLYMERSCATIONIC POLYELECTROLITE POWDER ( ENVKEM 9465)
ENVKEM 9465 –CATIONIC POLYMER POWDER
APPLICATION:
ENVKEM 9465 cationic is high efficiency polyelectrolyte. Applications include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; De-watering of pulp and sludges for recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery liquor or disposal.
ENVKEM 9465 cationic application is sedimentation and clarification of neutral leach in zinc and uranium. Metal hydroxides filtration of base metal sulphides, oxides and hydroxide concentrate.
FEATURES:
- Effective at low dosages.
- Completely miscible in water.
- Rapid settling.
- Increased throughput.
- Marked increase in underflow density.
- Efficient filter cake washing.
- Improved filter clarity.
- Higher filter rate.
PRODUCT SPECIFICATION:
Physical Appearance WHITE CRYSTALLINE POWDER Ionic Charge CATIONIC Solubility in water Complete Ph of 0.5% Solution 5-8 Specific Gravity 1-2 DIRECTIONS FOR USE:
ENVKEM 9465 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50˚C to accelerate the dissolution. Higher temperatures are not recommended ENVKEM 98160 dosage for clarification is normally between 10 to 40ppm despending on suspended solids.
POLYELECTROLYTE
LIMITATIONS AND HANDLING:
Harmful if swallowed. Avoid contact with skin and eyes. If material gets on skin, wash with plenty of water. If eyes are affected, immediately flush with water for at least 10 minutes and get medical attention. Use protective clothing, gloves and goggles. Wash out empty containers thoroughly with water before disposal.
STORAGE:
Keep container tightly closed in a cool place.
-
POLYMERSCationic Polymer Liquid
CATIONIC POLYELECTROLYTE LIQUID. … This is a liquid organic cationic polymer used to remove oil and suspended soilds from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc. It is suitable foruse in air flotation separation, gravity settling and direct filtration.
