Skip to content 
Envkem Solutions
Showing 1–12 of 16 results
-
Envkem SolutionsEnvkem 5020SI (Antiscalant)
ENVKEM 5020SI has been developed as an antifoulant for use in Reverse Osmosis and Nano- Filtration systems operating on high silica feed-waters. It is also effective against all common scale forming salts such as calcium carbonate, calcium, barium and strontium sulphate.
-
Envkem SolutionsEnvkem 602( Caustic Lye)
Sodium hydroxide is used in the treatment of drinking water to raise the pH of the water to a level that minimizes the corrosion. Raising the pH remains one of the most effective methods for reducing lead corrosion and minimizing lead levels in drinking water.
-
Envkem SolutionsEnvkem 603( Ferric Chloride)
The primary use of ferric chloride is to remove impurities in water and for wastewater treatment. Ferric chloride is also one of the few water treatment chemicals that can sequester odors.
-
Envkem SolutionsENVKEM 604(HYDROCHLORIC ACID)
Hydrochloric acid is a reactive liquid, it serves in the production of water treatment chemicals, batteries and feed phosphates. Other applications include its use for metal surface treatments, removing scale and rust from steel during the steel pickling process.
-
Envkem SolutionsEnvkem 607 (Hydrated Lime)
Lime in Water Treatment
- Softening – In water softening, hydrated lime is used to remove carbonate “hardness” from the water.
- pH Adjustment/Coagulation – Hydrated lime is widely used to adjust the pH of water to prepare it for further treatment.
Additional Information:
- Item Code: ENVKEM607
-
Envkem SolutionsEnvkem 610( Sodium Hypo Chlorite)
Sodium Lauryl Sulfate (SLS), also known as Sodium dodecyl sulfate, is a widely used surfactant in cleaning products, cosmetics, and personal care products. SLS is a highly effective anionic surfactant used to remove oily stains and residues. It is found in high concentrations in industrial products, including engine degreasers, floor cleaners, and car wash products, where workplace protections can be implemented to avoid unsafe exposures. SLS is also used in lower concentrations in household and personal care products such as cleaning products, toothpastes, shampoos, and shaving foams.
SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products.
SLS is safe for use in cleaning products. It has been through numerous reviews. There is no direct or circumstantial evidence that this ingredient has any carcinogenic potential. The studies that have been conducted on SLS indicate it is safe under proper conditions of use. Workplace exposures to SLS could be expected to be significantly higher than in the consumer use setting due to either the higher use concentrations and/or longer duration of use that can occur in the workplace. Since the primary side-effect of SLS, namely skin irritation, is dependent on the level and duration of exposure, consumer product formulators design products to avoid or minimize this effect during consumer use.
-
Envkem SolutionsEnvkem 611( Citric Acid)
Citric Acid is used as a cleaning solution for membrane filters in wastewater and water treatment. Citric acid is also an excellent chelating agent, binding metals. It is also used to remove lime scale from boilers and evaporators.
-
Envkem SolutionsEnvkem 621( Sodium Meta Bisulphate)
In water treatment plants, Sodium metabisulfite (SMBS) is commonly used for removal of free chlorine and as a biostatic. Other chemical reducing agents exist (e.g., sulfur dioxide), but they are not as cost-effective as SMBS .
Additional Information:
- Packaging Details: 25 kgs
-
Envkem SolutionsEnvkem 628( Soda Ash)
This treatment method is used if water is acidic (low pH). Soda ash (sodium carbonate) and sodium hydroxide raise the pH of water to near neutral when injected into a water system. Unlike neutralizing filters, they do not cause hardness problems in treated water.
-
Envkem SolutionsENVKEM 630(NITRIC ACID)
Nitric Acid is preferred because of its oxidizing nature. Nitric acid is added in water samples for heavy metal analysis during the sampling of water.
-
Envkem SolutionsEnvkem 9465 ( Cationic Poly)
- cationic polyelectrolytes (CPEs) serve as coagulation and flocculation agents in wastewater treatment due to a.
- synergy of inherent electrostatic interactions and hydrophilic properties. …
- flocculation agents to aggregate impurities and enable water purification.
-
Envkem SolutionsEnvkem 98160( Anionic Poly)
Low-molecular-weight anionic polyelectrolytes act as thinning agents and are used to reduce viscosity or prevent flocculation. Most deflocculants are low-molecular-weight anionic polymers that neutralize positive charges such as those on clay edges.
