POLYMERS
Showing all 4 results
-
POLYMERSANIONIC POLYELECTROLYTE (Liquid)(ENVKEM 9010)
Anionic polymers are often used with metal coagulants. … Polymers are effective over a wider pH range than inorganic coagulants. They can be applied at lower doses, and do not consume alkalinity. They produce smaller volumes of more concentrated, rapidly settling floc.
-
POLYMERSCATIONIC POLYELECTROLITE POWDER ( ENVKEM 9465)
ENVKEM 9465 –CATIONIC POLYMER POWDER
APPLICATION:
ENVKEM 9465 cationic is high efficiency polyelectrolyte. Applications include sedimentation, thickening and clarification of suspension; clarification of aqueous liquor by sedimentation; De-watering of pulp and sludges for recovery of liquor or disposal of solids by filtration and centrifugation sludges for the recovery liquor or disposal.
ENVKEM 9465 cationic application is sedimentation and clarification of neutral leach in zinc and uranium. Metal hydroxides filtration of base metal sulphides, oxides and hydroxide concentrate.
FEATURES:
- Effective at low dosages.
- Completely miscible in water.
- Rapid settling.
- Increased throughput.
- Marked increase in underflow density.
- Efficient filter cake washing.
- Improved filter clarity.
- Higher filter rate.
PRODUCT SPECIFICATION:
Physical Appearance WHITE CRYSTALLINE POWDER Ionic Charge CATIONIC Solubility in water Complete Ph of 0.5% Solution 5-8 Specific Gravity 1-2 DIRECTIONS FOR USE:
ENVKEM 9465 may be fed into the vortex of the stirred tank. Eductor may be used for efficient dispersion of polymer. Paddle stirrers operating at 30 to 60 rpm is recommended for dissolution. Use filtered water, free from suspended solids to prepare stock solution of 0.2 to 0.5% of concentration. Prepare feed solution by diluting stock solution about ten times directly or on-line diluting. Water may be heated to 50˚C to accelerate the dissolution. Higher temperatures are not recommended ENVKEM 98160 dosage for clarification is normally between 10 to 40ppm despending on suspended solids.
POLYELECTROLYTE
LIMITATIONS AND HANDLING:
Harmful if swallowed. Avoid contact with skin and eyes. If material gets on skin, wash with plenty of water. If eyes are affected, immediately flush with water for at least 10 minutes and get medical attention. Use protective clothing, gloves and goggles. Wash out empty containers thoroughly with water before disposal.
STORAGE:
Keep container tightly closed in a cool place.
-
POLYMERSCationic Polymer Liquid
CATIONIC POLYELECTROLYTE LIQUID. … This is a liquid organic cationic polymer used to remove oil and suspended soilds from water. It can be used alone or together with coagulants and flocculants such as iron salts, etc. It is suitable foruse in air flotation separation, gravity settling and direct filtration.
-
